M8 Gen2 Heads to Gen1 conversion kit

Brutal Performance
SKU:
BPM8-HCK
$340.00
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

M8 Gen2 Heads to Gen1 conversion kit

  • All the parts you will need to install Gen2 screamin eagle heads on Gen1 oil cooled M8 touring. 
  • 68mm Throttle body spacer(For Screamin Eagle throttle body).
  • Optional 55, 58, 64, 65, 68 or 70mm Spacers available.
  • OEM Parts not included. (Parts list below)

 

List of OEM Harley Davidson part #'s we used on our build:

  • SE Heads             16501060
  • 68mm t-body       27300194
  • SE 68mm intake   27300217
  • Int. Flange R        27300201
  • Int. Flange F        27300199
  • Int. Seal x 2         27300200
  • Fuel Rail               27400071
  • Center Hose         26900305A
  • Clamp x 2            10800210

 

Installation Notes

  • You must cut your stock front oil line off the regulator mount close to the bolt hole to provide room for the cushion clamp on the tube.
  • Picture with 90 degree hose is for reference of hose position, you will need your stock hose from your oil line to modify. New stepless clamps, hose clamps and cushion clamp are provided.
  • You will also need a transmission vented cover of some sort as you are removing the head vents at this point. We also sell these in the link below.
  •  Oil Line does not work with Street/Road Glide Special short crash bar

https://stores.brutalperformancellc.com/transmission-cover-with-vent-m8-touring/?searchid=4010&search_query=transmission